@

Sunday, January 8, 2012

Hood clear coat peeling off?

Noticed on many branded car,jeeps,and trucks.

Once the clear coat starts to peel in spots there is virtually no way to stop it short of wet sanding the hood and re-spraying to seal it. Anything you do to try and stop the edges from peeling could damage the paint further. I would recommend just getting a price on having the hood wet sanded and re-clear coated.Waxing it regularly after the clear is applied will help a lot from peeling off again.

This will help.
Thanks.
-------
See below latest solved car problems :-------

Engine stumbles coming off idle when warm?

http://repairhelpcenter.blogspot.com/2012/01/engine-stumbles-coming-off-idle-when.html

Parking light stay on constantly?

http://repairhelpcenter.blogspot.com/2012/01/parking-light-stay-on-constantly.html

Engine hard to start after gas refill?

http://repairhelpcenter.blogspot.com/2012/01/engine-hard-to-start-after-gas-refill.html

How to replace wheel bearing on Honda Civic?

http://repairhelpcenter.blogspot.com/2012/01/how-to-replace-wheel-bearing-on-honda.html

Temperature gauge keeps fluctuating up and down close to red?

http://technoanswers.blogspot.com/2012/01/temperature-gauge-keeps-fluctuating-up.html

How to remove Chevy idler arm?

http://howtobyme.blogspot.com/2012/01/how-to-remove-chevy-idler-arm.html

AUTOMOTIVE EMISSIONS?

http://schematicsdiagram.blogspot.com/2011/12/automotive-emissions.html

AIR POLLUTION?

                

Bank 2 Sensor 1 Heater circuit Failure?

http://schematicsdiagram.blogspot.com/2011/12/bank-2-sensor-1-heater-circuit-failure.html

Left bank sensor running lean?

http://repairhelpcenter.blogspot.com/2011/12/left-bank-sensor-running-lean.html

Car cranks, then run for second and then quit?

http://repairhelpcenter.blogspot.com/2011/12/car-cranksthen-run-for-second-and-then.html

How to replace Starter on Infiniti Q45?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-starter-on-infiniti-q45.html


No comments:

Post a Comment

@