Friday, February 10, 2012

How to test Toyota MAF meter?

The procedure to test Toyota MAF meter is as follows :-----

Mass Air Flow Meter

  1. Apply battery voltage across terminals 3 (+B) and 4 (E2G).
  2. Connect the positive (+) tester probe to terminal 5 (VG), and the negative (-) tester probe to terminal 4 (E2G).
  3. Blow air into the MAF meter, and check if the voltage fluctuates.
  4. Using an ohmmeter, measure the resistance between terminals 2 (THA) and 1 (E2). 

    Click image to see an enlarged view
    Fig. MAF meter testing
This will help.

See below latest solved car problems :----

Chevy impala is sluggish to drive?

HVAC Control panel has no power on 2000 lincoln navigator?

Stabilizer Bar Sway Bar & Links removal and installation procedure for all types of Mitsubishi car models?

1983 ford f350 tow truck owners manual?

Mercedes Benz 300TD wagon Diesel model will not start?

After disconnecting and reconnecting battery Mercedes will not start?

Ford runs lean and idles rough?

Dodge vehicle will not start after sitting overnight?

Engine seized due to oil burning?

Problem with cam synchronizer on 1996 Ford Taurus

Hood clear coat peeling off?

Engine stumbles coming off idle when warm?

What is Bug deflector?

How to service Cam Shaft? Camshaft servicing?


How to Refit Rear seat on Rover 600?

How to replace the speakers on 2011 Ford Edge?

How to Remove Rear seat on Rover 600?

Hub, Bearing & Steering Knuckle removal on Mitsubishi car models?

How to replace Lower Control Arms on Mitsubishi car models?

Gasoline burning smell and white smoke from exhaust?

Toyota solara rattling in rear?

Parking light stay on constantly?

Engine hard to start after gas refill?

How to remove Strut Assembly,the Coil spring on Mitsubishi car models?

2005 ford ranger cruise control not working?

Fuel pressure and spark is good but ford escort will not start?

How to replace wheel bearing on Honda Civic?

No comments:

Post a Comment