Solved: How to replace Blower Motor on Ford Windstar?

Monday, March 12, 2012

The details o replace blower motor are as follows :----

Blower Motor
REMOVAL & INSTALLATION Procedure is mentioned below:---

Disconnect the negative battery cable.

Remove both rear passenger seats.

Remove the three push pin retainers from the lower edge of the auxiliary heater and air conditioning service cover.

Lift the service cover outward and upward to remove.

Label and disconnect the electrical harness.

Remove the blower motor housing tube.

Loosen the three retaining screws and remove the blower motor.

Fig. Service cover push pin locations

To install:

Install the blower motor and tighten retaining screws securely.

Install the blower motor housing tube.

Connect the electrical harness.

Position the service cover and install the three push pin retainers from the lower edge of the cover.

Install both rear passenger seats.

Connect the negative battery cable.

This details will help.

Thanks.

FOR MORE HELP GO TO: ---

Solved