Exhaust Manifold Replacing on Acura?

Exhaust Manifold
REMOVAL & INSTALLATION: ---

The details are as follows :----

Removal & Installation

1. Before servicing the vehicle, refer to the precautions section.
2. Remove or disconnect the following:
   
   
   Negative battery cable

   Exhaust manifold heat shield

   Heated Oxygen (HO ₂ S) sensor connector

   Exhaust front pipe

   Exhaust manifold bracket, if equipped

   Exhaust manifold

To install:

1. Install or connect the following:
   
   
   Exhaust manifold. Tighten the fasteners to 23 ft. lbs. (31 Nm).

   Exhaust manifold bracket, if equipped. Tighten the bolts to 33 ft. lbs. (44 Nm).

   Exhaust front pipe. Tighten the nuts to 40 ft. lbs. (55 Nm).

   Heated Oxygen (HO ₂ S) sensor connector

   Exhaust manifold heat shield

   Negative battery cable

This will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html