Please Note This details and procedure are For Acura 1986 to 1993 car models.
Its For Acura Integra,Legend and Vigor car models.
The details are as follows :-----
Clutch pedal drags and grabs while changing gears?
http://schematicsdiagram.blogspot.in/2012/03/clutch-pedal-drags-and-grabs-while.html
Clutch slipping problem?
http://howtobyme.blogspot.in/2012/03/clutch-slipping-problem.html
How to open Stuck up bonnet on Volvo s40?
http://schematicsdiagram.blogspot.in/2012/02/how-to-open-stuck-up-bonnet-on-volvo.html
Camshaft Position Sensor TESTING on Ford Focus?
http://fordrepairhelp.blogspot.in/2012/03/camshaft-position-sensor-testing-on.html
WHERE IS THE PAINT CODE IDENTIFICATION NUMBER located on BUICK cars?
http://schematicsdiagram.blogspot.in/2012/02/where-is-paint-code-identification.html
How to remove Rear Adjustable Arm on 2007 Toyota Camry?
http://schematicsdiagram.blogspot.in/2012/02/how-to-remove-rear-adjustable-arm-on.html
Engine stalls when gas is given?
http://technoanswers.blogspot.in/2012/01/engine-stalls-when-gas-is-given.html
4x4 front differential will not engage the axle on ford?
http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html
Maf sensor diagram for a 2003 ford explorer?
http://schematicsdiagram.blogspot.in/2012/02/maf-sensor-diagram-for-2003-ford.html
1990 mazda 323 stalls and quit running?
http://technoanswers.blogspot.in/2012/02/1990-mazda-323-stalls-and-quit-running.html
Where is Crankshaft position sensor located on Toyota Tundra?
http://schematicsdiagram.blogspot.in/2012/02/where-is-crankshaft-position-sensor.html
Ford Focus Crankshaft Position (CKP) Sensor?
http://fordrepairhelp.blogspot.in/2012/03/ford-focus-crankshaft-position-ckp.html
Main fuse popping when connecting battery?
http://schematicsdiagram.blogspot.in/2012/02/main-fuse-popping-when-connecting.html
Nissan car will not start?
http://technoanswers.blogspot.in/2012/02/nissan-car-will-not-start.html
Delay starting on Toyota Prius?
http://schematicsdiagram.blogspot.in/2012/02/delay-starting-on-toyota-prius.html
Its For Acura Integra,Legend and Vigor car models.
The details are as follows :-----
Electronic Air Control Valve (EACV) Fast Idle Valve Air Boost Valve
REMOVAL & INSTALLATION: ----
These air control valves are located at the side of the intake chamber or plenum downstream of the throttle body. On Integra vehicles, the fast idle valve is located in the emission control box.
Disconnect the wiring connector at the valve.
Label and disconnect the vacuum hoses from the unit.
Remove the mounting bolts and remove the valve. Recover and discard the O-rings from the vacuum ports.
The fast idle valve is factory adjusted; it should not be disassembled or altered.
To install:
Replace the O-rings and make certain they are properly seated.
Install the valve and the retaining bolts. The pintle or control valve for the EACV must seat correctly in its port. Tighten the bolts to 9 ft. lbs. (12 Nm).
Connect the vacuum hoses to the valve; make certain each hose is connected to the proper port. Connect the electrical connector.
This details will help.
Thanks.
See below latest solved car problems :-----
No comments:
Post a Comment