How to replace Valve covers or Rocker Arm Covers on Acura?

Valve (Rocker Arm) Covers
REMOVAL & INSTALLATION: ---
The details are as follows :----

2001-02 Models

1. Before servicing the vehicle, refer to the precautions section.
2. Remove or disconnect the following:
   
   
   Negative battery cable

   Air intake tube

   Ignition coil covers

   Intake manifold cover

   Intake manifold

   Valve cover

To install:

1. Install or connect the following:
   
   
   Valve covers

   Intake manifold

   Intake manifold cover

   Ignition coil covers

   Air intake tube

   Negative battery cable
2. Start the engine and check for leaks.

2003-06 Models

1. Before servicing the vehicle, refer to the precautions section.
2. Remove or disconnect the following:
   
   
   Negative battery cable

   Intake manifold cover

   Ignition coil covers

   Ignition coils

   Dipstick

   2 bolts attaching the harness holder

   Positive Crankcase ventilation (PCV) hose

   Injector electrical connections

   Power steering hose bracket bolt and the harness holder bolts

   Harness clamps and the breather hose

   Valve cover

To install:

1. Install or connect the following:
   
   
   Valve covers

   Harness clamps and the breather hose

   Power steering hose bracket bolt and the harness holder bolts

   Injector electrical connections

   PCV hose

   2 bolts attaching the harness holder

   Dipstick

   Ignition coils and torque the retainers to 9 ft. lbs. (12 Nm)

   Ignition coil covers

   Intake manifold cover

   Negative battery cable

This will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html