Blend Door Actuator Removal for Ford Taurus?

The instructions for 2006 and 2007 Ford Taurus.

Blend Door Actuator:--
Removal & Installation Details are as follows :----

1. Disconnect the negative battery cable.
2. Remove the lower trim panel from the passenger side of the instrument panel.
3. Disengage the trim panel from the passenger side of the center console.
4. Unplug the wire harness connector from the blend door actuator.
5. Remove the four retaining screws from the blend door actuator.
6. Remove the blend door actuator from the evaporator housing.
7. The installation is the reverse of the removal.
   
   
   

   

   Fig. Remove the four blend door actuator retaining screws

This details and diagram will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html