@

Wednesday, November 16, 2011

Replacing Wiper Control module on 1999 Chevy Suburban?

Its not very hard.You can do this replacement.Wipers not working problem,many a times are due to faulty wiper circuit board or wiper control module.

All you have to do is replace the wiper module/circuit board. It's located under the hood, on the fire wall on the drivers side. You really can't miss it. Remove the 3 screws that hold the cover plate in place, remove the cover plate, unplug the old module and remove. Put in the new module, replace the cover plate and the 3 screws and plug it in. That's it...fixed. It really is that easy. The job took under 5 minutes to do.
You can get this module from your near by auto parts store.
This parts basically costs between $30 to $50.Depending on brand.Always buy car parts of branded quality,they are bit costly,but they lasts long.


This details will help.Thanks.



For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.

---------

The car will not start?

-----------------

Car will not crank?


-----------

Car has no spark?


-------------

How to troubleshoot car battery?

-----------------

How to test starter solenoid?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html

--------------------

How to test cars starter?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html

How to replace starter in car?



-----------

car will turn over but will not start?



-----------------

Car wont start?


----------

No comments:

Post a Comment

@