Water pump is important part/component for car cooling system.Water pump maintenance is required,to keep water pump free from problems.But in case if it gets faulty then it has to be replaced.
If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.
The procedure to replace cars water pump is as follows :----
Water Pump
REMOVAL & INSTALLATION
- Before servicing the vehicle, refer to the Precautions Section.
- Drain the coolant.
- Remove or disconnect the following:
To install:
- Install or connect the following:
Water pump with a new O-ring. Torque the bolts to 18 ft. lbs. (25 Nm).Water pump pulleyFront timing belt coverIntake air resonatorNegative battery cable - Fill the cooling system through the reservoir tank.
NOTEWhen refilling the cooling system, add 2 crushed engine coolant supplement sealant pellets (PN 3634621) into the coolant reservoir. - Start the vehicle and inspect the coolant systems for leaks.
----------
This details will help.
Thanks.
-----------
For more car related problem troubleshooting:---
This are the sections, you can go through and click the link to read its troubleshooting.
---------
The car will not start?
-----------------
Car will not crank?
-----------
Car has no spark?
-------------
How to troubleshoot car battery?
-----------------
How to test starter solenoid?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html
--------------------
How to test cars starter?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html
How to replace starter in car?
-----------
car will turn over but will not start?
-----------------
Car wont start?
----------
No comments:
Post a Comment