Solved: car starts and cuts off

Jeep Starts Runs then Stalls and Cuts Out

The Vehicle starts and runs fine but immediately stalls and cuts out, these continues.

If i turn off the vehicle ans start again then it starts fine but same problem continues .....................

A very common issue is causing these problem.

Your vehicle needs proper servicing, and without forget get your fuel system parts inspected and replace the weak parts.

If the fuel filter is not replaced from long time then without fail replace it.

On many of such same cases i have seen faulty fuel filter causing it.

Replacing the fuel filter is very much advisable if you don't know how long that one has been in, generally fuel filter should be replaced roughly every other oil change.

If you see check engine light coming up on dash then without fail get your vehicle scanned to retrieve the error codes stored in engine computer module.Then will help for further diagnosis.

If there are no fault codes let's start with replacing fuel filter and see how it does.

Why i suggest replacing fuel filter is because , if the filter is plugging then it can drop fuel pressure enough to lose power or kill the engine. And these is what you are noticing on your vehicle.

These details will help.

Thanks.

Users Who Viewed This Problem Also Viewed:

GMC Sonoma Stalls and idles low

http://technoanswers.blogspot.com/2012/10/gmc-sonoma-stalls-and-idles-low.html

This problem is noticed many times.
In most of the cases,you get steady check engine light in this types of problem.
Also it can be fuel pump and fuel filter related problem.Getting inspecting parts will help.

Have you checked the actual fuel pressure when it quits running?

When it does quit will it start right back up and run okay just will not idle?

You need to check for malfunction codes? This requires a inexpensive code reader that you can purchase for less than $50. Here in the USA most auto-parts stores provide free code reads as a courtesy. Anytime the check engine light comes on while the vehicle is running it will set a code in the memory.

If the problem is not related to fuel pump and fuel filter,then in that case.
Typically starting up and stalling or not idling has something to do with the idle air control motor. Carbon has a tendency to buildup around the throttle body plate and bore and then down inside this idle speed control motor. I've also seen issues with these motors being bad. Some minor problems with throttle position sensors.

This details will help.Thanks.

----------

See below latest solved car problems :------