The procedure is similar for both Ford, Lincoln and Mercury car models:----
Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
The procedure to replace Climate control panel is as follows:---
Removal & Installation details are mentioned below with proper Diagram:---
- For the Fusion & Milan, remove the instrument panel lower center finish panel, as follows:
- Using a suitable tool, gently pry out the upper center instrument panel finish panel to disengage the clips.
- Remove the upper center instrument panel finish panel. Disconnect the electrical connectors.
- Using a suitable tool, gently pry out the lower center instrument panel finish panel to disengage the clips.
- Remove the lower center instrument panel finish panel. Disconnect the electrical connectors.
- For the MKZ, remove the instrument panel lower center finish panel, as follows:
- Remove the floor console finish panel.
- Remove the lower center instrument panel finish panel screw beneath the ash tray and the lower center instrument panel finish panel. Disconnect the electrical connectors.
- Remove the 2 upper center instrument panel finish panel lower screws.
- Remove both center instrument panel registers.
- Working through the center instrument panel register openings, remove the 2 upper center instrument panel finish panel upper screws.
- Remove the upper center instrument panel finish panel. Disconnect the electrical connectors
- Remove the 4 climate control assembly screws.
- Remove the climate control assembly.
NOTEIf equipped, be sure the climate control module spacers are correctly positioned before installing the climate control module. - Installation is the reverse of the removal procedure.
Fig. Exploded view of the climate control assembly screws (1) and assembly (2)
These details will help.
Thanks.
FOR MORE HELP GO TO: ---
No comments:
Post a Comment