Friday, March 23, 2012

How to Bleed Power Steering Pump on Buick Park Avenue,Lesabre & Pontiac Bonneville?

Please Note:---
The Procedure mentioned is Exactly similar for All this mentioned car models.
Buick LeSabre, Buick Park Avenue & Pontiac Bonneville.

Power Steering Pump Bleeding details are as follows:---

  1. Fill pump reservoir with fluid to minimum system level, FULL COLD level, or middle of hash mark on cap stick fluid level indicator.
    With hydro-boost only, the oil level will appear falsely high if the hydro-boost accumulator is not fully charged. Do not apply the brake pedal with the engine OFF. This will discharge the hydro-boost accumulator.
  2. If equipped with hydro-boost, fully charge the hydro-boost accumulator using the following procedure:
    1. Start the engine.
    2. Firmly apply the brake pedal 10-15 times.
    3. Turn the engine OFF.
  3. Raise the vehicle until the front wheels are off the ground.
  4. With the key ON and engine OFF, turn the steering wheel from stop to stop 12 times. Vehicles equipped with hydro-boost systems or longer length power steering hoses may require turns up to 15 to 20 stop to stops.
  5. Verify power steering fluid level.
  6. Start the engine. Rotate steering wheel from left to right. Check for sign of cavitation or fluid aeration (pump noise/whining).
  7. Verify the fluid level. Repeat the bleed procedure, if necessary.

These details will help.


Car repair guide?

No comments:

Post a Comment