The procedure is as follows :---
To install:
Lexus: Anti-lock Brake System Actuator?
Lexus: How to bleed ABS system?
What is ABS and how does it works on vehicles?
How to test ABS system in vehicle?
Lexus: Wheel Speed Sensors Removal?
How to manually bleed brake systems on Lexus?
How to remove brake pads on 2001 Lexus?
How to replace brake Caliper on 2001 Lexus ?
2001 Lexus: Brake Disc Rotor removal?
Brake Pads replacing on 2001 Lexus?
How to adjust parking Brake cable on 2001 Lexus?
How to adjust parking Brake shoes on 2001 Lexus?
Rear Brake Pads removal on 2001 Lexus?
Rear Brake Rotor replacing on 2001 Lexus?
Removing Rear Brake Caliper on 2001 Lexus?
http://howtobyme.blogspot.com/2011/10/removing-rear-brake-caliper-on-2001.html
The car will not start?
Car will not crank?
Car has no spark?
How to troubleshoot car battery?
How to test starter solenoid?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html
--------------------
How to test cars starter?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html
How to replace starter in car?
car will turn over but will not start?
Car wont start?
Pump Assembly
REMOVAL & INSTALLATION
The Antilock Brake Systems (ABS) pump assembly consists of a piston rod and cylinder body, guide, filter, and a motor. Brake fluid is pressurized and fed to a relief valve, the accumulator and modulator unit. The system pump will run until the pressure in the accumulator has reached 3,271 psi (23,000 kPa). If the pump runs continuously and the pressure still has not reached the predescribed value, the ABS controller will stop the pump motor and trigger the ABS lamp on the dash to indicate a problem. There will also be a code stored in the controllers memory.
See Figure 1
- Disconnect the negative battery cable.
- Relieve the ABS system pressure, as outlined in this section.
- On the 3.5RL, remove the modulator unit.
- Remove the pump motor.
- Replace the pump motor with a new one. Do not install a used part.
- Install the new pump into the modulator unit.
- If removed, install the modulator unit.
- Connect the negative battery cable.
---------
------------
For more car related problem troubleshooting:---
This are the sections, you can go through and click the link to read its troubleshooting.
---------
Lexus: Anti-lock Brake System Actuator?
2001 Lexus IS 250 and IS 350.
Lexus: Actuator replacing for Anti-lock Brake System?
Lexus: Actuator replacing for Anti-lock Brake System?
Click the link below:---
2001 Lexus ES 300 :---
How to replace ABS Actuator on 2001 Lexus?
Click the link below:---
How to replace ABS Actuator on 2001 Lexus?
Click the link below:---
Lexus: How to bleed ABS system?
Click the link below:--
What is ABS and how does it works on vehicles?
How to test ABS system in vehicle?
Lexus: Wheel Speed Sensors Removal?
How to manually bleed brake systems on Lexus?
How to remove brake pads on 2001 Lexus?
How to replace brake Caliper on 2001 Lexus ?
2001 Lexus: Brake Disc Rotor removal?
Brake Pads replacing on 2001 Lexus?
How to adjust parking Brake cable on 2001 Lexus?
How to adjust parking Brake shoes on 2001 Lexus?
Rear Brake Pads removal on 2001 Lexus?
Rear Brake Rotor replacing on 2001 Lexus?
Removing Rear Brake Caliper on 2001 Lexus?
http://howtobyme.blogspot.com/2011/10/removing-rear-brake-caliper-on-2001.html-----------
The car will not start?
-----------------
Car will not crank?
-----------
Car has no spark?
-------------
How to troubleshoot car battery?
-----------------
How to test starter solenoid?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html
--------------------
How to test cars starter?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html
How to replace starter in car?
-----------
car will turn over but will not start?
-----------------
Car wont start?
----------
No comments:
Post a Comment