@

Showing posts with label rear suspension. Show all posts
Showing posts with label rear suspension. Show all posts

Tuesday, March 6, 2012

Acura 1994 to 2000 Suspension Parts Removal?


Rear suspension and front suspension parts removal Guide is mentioned below.

Select the section of which you want to view the instructions:------
Its for 1994 to 2000

Acura 1994 to 2000 Upper Control Arm Replace?


Acura 1994 to 2000 Upper Ball Joint Removal?


Acura 1994 to 2000 Sway Bar Replacing?


Acura 1994 to 2000 Strut Assembly REMOVAL & INSTALLATION?


Front suspension strut Overhaul for Acura 2000?


Acura 1994 to 2000 Steering Knuckle Removal?


Acura 1994 to 2000 Lower Control Arm REMOVAL & INSTALLATION?


Lower Ball Joint Replacing for 1994 to 2000 Acura?


Front Hub and Bearings Removal on 1994 to 2000 Acura?

FRONT SUSPENSION Acura Diagram?


Rear Suspension Control Arms Removal for 1994 to 2000 Acura?


REAR SUSPENSION Diagram for Acura?


Rear Strut Assembly Removal for 1994 to 2000 Acura?


Rear suspension sway bar Removal for Acura?


Rear Wheel Bearings replacement on Acura?

http://repairhelpcenter.blogspot.in/2012/03/rear-wheel-bearings-replacement-on.html



FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


Monday, March 5, 2012

Acura Rear Suspension Coil Spring Removal?


Coil Spring
REMOVAL & INSTALLATION

The details are as follows :----


  1. Before servicing the vehicle, refer to the precautions section.
  2. Support the vehicle under the lower control arm.
  3. Remove or disconnect the following:

    Rear wheel
    Stabilizer link from the lower arm
    Wheel speed sensor wiring harness from the lower arm. Do not disconnect the connector.
    Upper shock absorber flange bolt
    Lower control arm bolts
  4. Lower the floor jack and remove the coil spring and spring seats.

    Click image to see an enlarged view
    Fig. Exploded view of the rear spring assembly
To install:

NOTE
Use new self-locking nuts for assembly.

  1. Place the coil spring and spring seats on the lower control arm and raise into position. Tighten the inboard bolt to 61 ft. lbs. and the outer bolt to 54 ft. lbs. (74 Nm).
  2. Install or connect the following:

    Rear wheel


This details will help.
Thanks.

FOR MORE HELP GO TO:----

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


@