@

Showing posts with label acura suspension. Show all posts
Showing posts with label acura suspension. Show all posts

Wednesday, March 7, 2012

Acura 1986 to 1993 complete Suspension Parts Removal Instructions?

The details are as follows.
its with proper instructions and details.

You have to select the right section,in which you notice a problem.

Its for Acura car models.

The sections include front suspension and rear suspension.


FRONT SUSPENSION:----


Acura 1986 to 1993 Ball joints replacing procedure?

Acura 1986 to 1993 Coil Springs replacing procedure?

How to replace FRONT SUSPENSION For Acura 1986 to 1993?

How To Align Front Wheel For Acura?

Acura 1986 to 1993 Front Wheel Hub,Knuckle and Bearings Replacement?

1986 to 1993 Acura Lower Control Arm Replacing procedure?

How to Replace Radius Arm on Acura?

How to Replace Shock Absorbers On Acura?

Replacing Torsion Bar?

Acura 1986 to 1993 Upper Control Arm Replacing Procedure?



REAR SUSPENSION:

Replace Rear Suspension Coil Springs For Acura?

Acura Rear Wheel Alignment?

Rear Wheel Hub Carrier and Bearing Removal For Acura?

Replace Rear Shock Absorber?

1986 to 1993 Acura Stabilizer removal procedure?

http://howtobyme.blogspot.in/2012/03/1986-to-1993-acura-stabilizer-removal.html


This details will help.
Thanks.


Monday, March 5, 2012

Acura Rear Suspension Coil Spring Removal?


Coil Spring
REMOVAL & INSTALLATION

The details are as follows :----


  1. Before servicing the vehicle, refer to the precautions section.
  2. Support the vehicle under the lower control arm.
  3. Remove or disconnect the following:

    Rear wheel
    Stabilizer link from the lower arm
    Wheel speed sensor wiring harness from the lower arm. Do not disconnect the connector.
    Upper shock absorber flange bolt
    Lower control arm bolts
  4. Lower the floor jack and remove the coil spring and spring seats.

    Click image to see an enlarged view
    Fig. Exploded view of the rear spring assembly
To install:

NOTE
Use new self-locking nuts for assembly.

  1. Place the coil spring and spring seats on the lower control arm and raise into position. Tighten the inboard bolt to 61 ft. lbs. and the outer bolt to 54 ft. lbs. (74 Nm).
  2. Install or connect the following:

    Rear wheel


This details will help.
Thanks.

FOR MORE HELP GO TO:----

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


@