Acura 1994 to 2000 Suspension Parts Removal?

Rear suspension and front suspension parts removal Guide is mentioned below.

Select the section of which you want to view the instructions:------

Its for 1994 to 2000

Acura 1994 to 2000 Upper Control Arm Replace?

http://repairhelpcenter.blogspot.in/2012/03/acura-1994-to-2000-upper-control-arm.html

Acura 1994 to 2000 Upper Ball Joint Removal?

http://repairhelpcenter.blogspot.in/2012/03/acura-1994-to-2000-upper-ball-joint.html

Acura 1994 to 2000 Sway Bar Replacing?

http://repairhelpcenter.blogspot.in/2012/03/acura-1994-to-2000-sway-bar-replacing.html

Acura 1994 to 2000 Strut Assembly REMOVAL & INSTALLATION?

http://repairhelpcenter.blogspot.in/2012/03/acura-1994-to-2000-strut-assembly.html

Front suspension strut Overhaul for Acura 2000?

http://repairhelpcenter.blogspot.in/2012/03/front-suspension-strut-overhaul-for.html

Acura 1994 to 2000 Steering Knuckle Removal?

http://repairhelpcenter.blogspot.in/2012/03/acura-1994-to-2000-steering-knuckle.html

Acura 1994 to 2000 Lower Control Arm REMOVAL & INSTALLATION?

http://repairhelpcenter.blogspot.in/2012/03/acura-1994-to-2000-lower-control-arm.html

Lower Ball Joint Replacing for 1994 to 2000 Acura?

http://repairhelpcenter.blogspot.in/2012/03/lower-ball-joint-replacing-for-1994-to.html

Front Hub and Bearings Removal on 1994 to 2000 Acura?

http://repairhelpcenter.blogspot.in/2012/03/front-hub-and-bearings-removal-on-1994.html

FRONT SUSPENSION Acura Diagram?

http://repairhelpcenter.blogspot.in/2012/03/front-suspension-acura-diagram.html

Rear Suspension Control Arms Removal for 1994 to 2000 Acura?

http://repairhelpcenter.blogspot.in/2012/03/rear-suspension-control-arms-removal.html

REAR SUSPENSION Diagram for Acura?

http://repairhelpcenter.blogspot.in/2012/03/rear-suspension-diagram-for-acura.html

Rear Strut Assembly Removal for 1994 to 2000 Acura?

http://repairhelpcenter.blogspot.in/2012/03/rear-strut-assembly-removal-for-1994-to.html

Rear suspension sway bar Removal for Acura?

http://repairhelpcenter.blogspot.in/2012/03/rear-suspension-sway-bar-removal-for.html

Rear Wheel Bearings replacement on Acura?

http://repairhelpcenter.blogspot.in/2012/03/rear-wheel-bearings-replacement-on.html

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html

Front suspension strut Overhaul for Acura 2000?

Strut Assembly

OVERHAUL

The details are as follows :----

OVERHAUL

See Figure 6

Fig. Fig. 6: View of some of the front suspension components

1. Raise and support the vehicle, then remove the front wheels.
2. Remove the strut (damper) from the vehicle.

See Figure 7

Fig. Fig. 7: Remove the strut from the vehicle

3. Compress the coil spring with a suitable spring compressor.

See Figure 8

Fig. Fig. 8: Compressing the coil spring with a commercially available spring compressor

4. Remove the locking nut from the top of the shock absorber, and remove the coil spring.

See Figures 9, 10 and 11

Fig. Fig. 9: To remove the spring once it has been compressed, unscrew the nut at the top of the strut.

Fig. Fig. 10: Exploded view of the rear shock absorber (damper)-2.5TL shown, other vehicles are similar

Fig. Fig. 11: Compress the coil spring until the spring moves away from the seat and use a hex wrench to hold the piston rod while removing the nut

To install:

Use new self-locking nuts and bolts when assembling the strut.

5. Install the compressed coil spring on the shock absorber.
6. Assemble the upper spring seat/bearing and related components.
7. Install the mounting washer, and loosely install a new self-locking nut.
8. Hold the shock absorber piston rod with a hex wrench and tighten the self-locking nut. Tighten the self-locking nut to 22 ft. lbs. (30 Nm).

All suspension nuts and bolts should be tightened with the vehicle on the ground.

9. Install the strut in the vehicle, as outlined earlier in this section.
10. Have the front alignment checked and adjusted, if necessary.

This details will help.
Thanks.

Front Suspension Lower Control Arm Removal on Acura?

Lower Control Arm
CONTROL ARM BUSHING REPLACEMENT
REMOVAL & INSTALLATION

The details are as follows :----

Control Arm Bushing Replacement

The control arm bushings are serviced with the control arms as an assembly.

Removal & Installation

1. Before servicing the vehicle, refer to the precautions section.
2. Remove or disconnect the following:
   
   
   Front wheel

   Lower ball joint

   Front inner flange bolt

   Rear inner flange bolt

   Lower control arm

To install:

NOTE

Use a new split pin for assembly.

1. Install or connect the following:
   
   
   Lower control arm. Tighten the inner flange bolts to 69 ft. lbs. (93 Nm).

   Lower ball joint. Tighten the nut to 43-51 ft. lbs. (59-69 Nm).

   Front wheel
2. Check the wheel alignment and adjust as necessary.

This will help.

Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html

How to remove Front Suspension Coil Springs on Acura?

Coil Spring
REMOVAL & INSTALLATION

The details are as follows :----

1. Before servicing the vehicle, refer to the precautions section.
2. Remove the strut from the vehicle and install in a strut spring compressor. Compress the spring until the end of the spring comes away from the spring seat.
3. Remove the upper strut mount, spring seat and related components.
4. Remove the coil spring from the strut spring compressor.

To install:

NOTE

Use a new self-locking nut.

1. Compress the spring and position the strut so that the end of the spring aligns with the notch in the spring seat.
2. Install the upper strut mounting components and tighten the nut to 33 ft. lbs. (44 Nm).
3. Install the strut to the vehicle.
4. Check the wheel alignment and adjust as necessary.

This will help.

Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html