Driving Precautions?

Always observe the following precautions to minimize the risk of death, serious personal injury or damage to your vehicle:

In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Therefore, the driver and all passengers should fasten their seat belts whenever the vehicle is moving

Avoid sharp turns or abrupt maneuvers, if at all possible. Failure to operate this vehicle correctly may result in loss of control or vehicle rollover causing death or serious injury.

Avoid loading any items on the roof that will raise the vehicle's center of gravity.

Always slow down in gusty crosswinds. Because of its profile and higher center of gravity, your vehicle is more sensitive to side winds than an ordinary passenger car. Slowing down will allow you to have better control.

When driving off-road, or in rugged terrain, do not drive at excessive speeds, jump, make sharp turns, strike objects etc. This may cause loss of control or vehicle rollover causing death or serious injury. You are also risking expensive damage to your vehicle's suspension and chassis.

Do not drive horizontally across steep slopes. Driving straight up or straight down is preferred. Your vehicle (or any similar off-road vehicle) can tip over sideways much more easily than forward or backward.


This details will help.Thanks.

How to fix wet electronic device?

Its not always good to through your wet remotes,players, pads,laptops,watches etc etc .
Right so your electronics got wet, now it won't work, do not despair, at least not yet. Here's a way of maybe getting it back. What you need to do is get as much H2O(water) out as possible, swinging the unit, around ones head, or in a circle, & using centrifugal force to try to get any moisture out, then bury the while thing under at least an inch of DRY RICE, leave for a day or so in a nice warm place, and this may just fix it. BTW, always remove the batteries immediately, if it ever gets wet, whatever it is, and shake it violently, to immediately, get as much liquid out as is possible. 
Another thing that also may work is Silica Gel, this is a commercial desiccant and pulls moisture out of things and absorbs it itself, it is extremely hygroscopic, meaning it attracts water. 
Also any of those product that say they remove dampness & mildew from cupboard & wardrobes etc, that too will work in a pinch.
Another good option is using hair dryer to dry the circuit board and electric contacts on the device/unit.Then once the unit is dried out completely, turn it on and see if its working or not.
Not in all cases, but in many cases this basic troubleshooting tips have helped.
You can too try this.
This should help.