@

Showing posts with label programming. Show all posts
Showing posts with label programming. Show all posts

Friday, November 2, 2012

Mitsubishi Car Key Not getting detected after replacing ECM

KEYS NOT GETTING DETECTED ON VEHICLE



Customers Reply:---

It was Faulty ECM,so we replaced it,but after replacing the ECM( computer Module) the Vehicle keys are not getting detected.
The vehicle is 2003 Mitsubishi Montero.

Garage Expert says:----


Actually its not a problem at all.Its a fact,that once you replace computer module in your vehicle,the keys will not get detected.
To make the new/used 2003 computer work the key needs to be programmed to the computer which will get detected by the computer to the immobilizer. This is easily possible at vehicles dealership.... there are some locksmiths that can do this, but more often than not they end up fooling with it and not doing anything (it requires internal information from a dealer to complete).
Some dealer charge for doing these and some dont.

Customers Reply:---

Thanks.


Users Who Viewed This Problem Also Viewed:

Ford explorer will not start after replacing computer ECM ?

http://technoanswers.blogspot.com/2012/01/ford-explorer-will-not-start-after.html

ECM misfueling Engine?

http://technoanswers.blogspot.in/2012/03/ecm-misfueling-engine.html



Ford Keyless Remote Fob Reprogramming?

http://schematicsdiagram.blogspot.com/2011/12/ford-keyless-remote-fob-reprogramming.html


Oldsmobile Aurora Key Fob Reprogramming?

Buick Lesabre Key Fob Reprogramming?


Keyfob remote not working on 2003 Ford E350 Econoline?

KeyFob will open the doors but not start on BMW?

http://technoanswers.blogspot.in/2012/02/key-will-open-doors-but-not-start-on.html


2003 Mitsubishi ECU Reflashing

ECU Re-flashing For Mitsubishi

I would like to share these Mitsubishi ECU Reflashing Garage Experience

A customer visited to our garage regarding Flashing Engine Control Unit/Module.


Customer Vehicle Details:---


Make: Mitsubishi,Model: Montero,Year: 2003

Garage Expert:---


The actual flashing is not required when new ECU is connected to the vehicle,in case of Mitsubishi montero. The ECU is matched to the immobilizer ecu as soon as you program the keys to the new ecu. That is all there is to it on a 2003.

Customers Reply:----
Is it necessary to take the vehicle to the dealer.Also will old working ECU compatible for Mitsubishi montero will work or else i will have to buy new ECU.

Garage Expert:----

Its easy,it can be done manually with proper tools.

There is no need to take the vehicle to the dealer to program up the ecu to the key immobilizer.
Please read and understand these simple detail.


You can use old working ECU work on your vehicle.But to make the replacement computer work in a 2003 all you need to do is hook up the scan tool, access the immobilizer ecu, register the key(s), and the engine ECU and immobilizer ecu will be paired and the engine will run. There is nothing else to it, and no reason to buy a new ECU.Another old but working ECU will support your vehicle.Just make sure its compatible to your vehicle.

But for older car models of same Mitsubishi montero models,these case is completely different.On older models like before year 2000 you could not install a used ECU unless you had the matching used immobilizer ecu, as that year the two were permanently married and would never work mismatched afterward. This changed mid-year 2001 however and does not affect your vehicle.
So in your case,where the vehicle is 2003 Mitsubishi the problem is easy to solve.

Customers Reply:----

Can i remove the ECU from my vehicle and bring it to your garage to get it reprogrammed.

Garage Expert:-----
No my dear customer,its not possible.The ECU has to be in the vehicle and then only it can be reprogrammed.

The ecu must be in the vehicle to register the key, no exceptions there.
You can get spare second hand,used ECU online on Ebay and other Auto parts site.It approximately costs about $150 to $200 utmost.

Customers Reply:--

Why my ECU failed.If i replace the faulty ECU,is it possible that my new ECU will fail soon.Is there a problem in my car causing these ECU failure.



Garage Expert:---

Its very rare.I'll tell you that ECU failures are pretty rare on these vehicle brand models, and when they do occur it is normally either one coil dropping out entirely or no power up at all.

Customers Reply:---

Thanks......



Users Who Viewed This Problem Also Viewed:

1992 Lexus SC300: Engine Computer Module ECM details?

http://technoanswers.blogspot.in/2012/04/1992-lexus-sc300-engine-computer-module.html



Ford explorer will not start after replacing computer ECM ?

http://technoanswers.blogspot.com/2012/01/ford-explorer-will-not-start-after.html






After getting car washed, check engine light is ON and key less entry not working, tried reprogramming. Also car shows fuel pressure?

http://schematicsdiagram.blogspot.com/2011/12/after-getting-car-washedcheck-engine.html


Audi A8 Key Fob Programming?

                

Oldsmobile Aurora Key Fob Reprogramming?


Buick Lesabre Key Fob Reprogramming?

http://technoanswers.blogspot.com/2011/12/buick-lesabre-key-fob-reprogramming.html




Tuesday, November 15, 2011

Car Seat Program?

Replacing car seats or installing car seats.Its a techs job.Get it done by proper technician.If the seat is not aligned correctly,then this can cause major damages,in case of accidents occurred.

The motor vehicle crashes is the number 1 killer of children. Recent studies indicate that in many cases injuries and deaths were a result of improper use of car seats, booster seats and seat belts. The Pinellas County Health Department has a Child Passenger Safety Program that is dedicated to providing technical guidance and education to residents and visitors of Pinellas County regarding the safest practice for transporting children in all types of motor vehicles.

This is a  2 hour training that details common misuse and proper installation and is conducted by a National Child Passenger Safety Technician certified by the National Highway Traffic and Safety Administration. The training is offered throughout the county and is available to anyone seeking information on proper safety seat usage. Additionally, low-cost safety seats are available to those meeting financial guidelines.

Personal consultations are also offered to those unable to attend a training session but who would like to have their child safety seat installation checked.

Its always advisable to get proper details and know exact procedure before you install additional seat for your child or toddlers.
Proper knowledge is best step towards safety.Be safe.
Thanks.
------------

For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.

---------

The car will not start?

-----------------

Car will not crank?


-----------

Car has no spark?


-------------

How to troubleshoot car battery?

-----------------

How to test starter solenoid?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html

--------------------

How to test cars starter?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html

How to replace starter in car?



-----------

car will turn over but will not start?



-----------------

Car wont start?


----------

@