@

Showing posts with label car starter problem. Show all posts
Showing posts with label car starter problem. Show all posts

Sunday, June 17, 2012

2006 GM Montana: How to replace Starter Solenoid?

When the ignition is turned ON,just a one click noise is head and nothing else.

First test the battery voltage.If its proper 12 volts,then try jump start.If the same Click is heard and nothing else then yes its starter related.


The 1-click per ignition cycle is the classic sign of a faulty Starter Solenoid.
On 06 Montana, the solenoid is mounted to the side of the starter motor, and is most commonly replaced as a starter assembly (the new starter comes with a new solenoid).
Before replacing the starter unit.Try this procedure:---------
There is an old trick that will sometimes make the car start. Have someone lightly tap on the solenoid while another person is cranking the ignition. Just give a quick double check to the connections at the solenoid, looking for any loose, broken or damaged wires. If the visual inspection checks ok, replace the starter. (The 3.5L engine is shown in the image below.

The Part Location diagram is as follows:---------

GM Engine parts

This details will help.
Thanks.


Users Who Viewed This Problem Also Viewed:

How to replace starter on Ford & Mercury?

http://repairhelpcenter.blogspot.in/2012/03/how-to-replace-starter-on-ford-mercury.html

How to replace starter on 2007 Ford Taurus?

http://repairhelpcenter.blogspot.in/2012/03/how-to-replace-starter-on-2007-ford.html

How to Replace Starter on Ford?

http://howtobyme.blogspot.in/2012/03/how-to-replace-starter-on-ford.html

How to Test and Replace Starter on Ford E series?

http://fordrepairhelp.blogspot.in/2012/03/how-to-test-and-replace-starter-on-ford.html

Starter Replace for Buick & Pontiac Montana?

http://repairhelpcenter.blogspot.in/2012/03/starter-replace-for-buick-pontiac.html

Toyota Starter and Starter Relay Replacing?


Changing Starter on 1998 Cadillac car models?

http://fordrepairhelp.blogspot.in/2012/04/changing-starter-on-1998-cadillac-car.html





For All types of Car models and brands help 
Go to Newly Launched

FREE Car repair guide? 
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html 

& 
Complete Car repair Help FREE? 
http://repairhelpcenter.blogspot.in/2012/03/complete-car-repair-help.html




Friday, November 25, 2011

Cars Air Charge Sensor


If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.

The Air Charge Sensor is Usually located in the intake manifold, it measures the temperature of incoming fresh air and then relays this information to the computer. When the outside air is cold, the air charge sensor signals the ECC (engine control computer) also known as ECM (engine control module) or ECU (electronic control unit) to enrich the fuel/air mixture. When the outside air is warm, it signals the ECC to lean out the fuel and air mixture.

This is how the air charge sensor looks :----


You can buy this sensor from Autozone service centers.
--------------

For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.

---------

The car will not start?

-----------------

Car will not crank?


-----------

Car has no spark?


-------------

How to troubleshoot car battery?

-----------------

How to test starter solenoid?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html

--------------------

How to test cars starter?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html

How to replace starter in car?



-----------

car will turn over but will not start?



-----------------

Car wont start?


----------



@